Product Introduction
Waterborne epoxy modified acrylic resin is mainly used to make waterborne air-drying industrial coatings
Applicable substrates
| Appearance | brown-yellow transparent viscous liquid |
| Non-volatile matter | 70±2% |
| PH value (1:1 water dilution) | 8-10 |
| Viscosity | 10000-40000mpa.s(rotational viscometer) |
Performance
Fast drying speed, fast hardness growth, high hardness, good salt spray resistance, good initial water resistance, high cost performance. Good shear stability, helps pigment wetting, can directly participate in grinding color paste, it is recommended to add a small amount of high boiling point solvents during grinding to increase system stability.
It is recommended to use less than 1 times the amount of resin water to stir evenly first, and then add water to dilute infinitely; if more than 1.2 times the amount of resin is added to the resin at one time, compatibility problems are likely to occur. The system is stable when the pH value is 8.5-9.5, and it will settle and stratify under acidic conditions. Pay special attention when adding acidic pigments.
Packaging and storage:
200Kg packaging. Put in a cool and ventilated place, keep the container tight, storage temperature is 0-40 ℃, shelf life is 12 months.
Special Tips
This material is complied according to our existing technology and experience, the technical advice provided is sincere, but it is not guaranteed to be used in all samples and formulations, all the data are for users reference only
Product Tags:
|
|
Waterborne Epoxy Modified Acrylic Resin with Non-Volatile Matter 70±2%, PH Value 8-10, and Viscosity 10000-40000mpa.s for Industrial Coatings Images
|
